UV-DTF Transfers

Please leave a note for the designs you'd like

Example: 1A9, 1H5x2, 3P7

If you need two or more from the same design add the Letter X and then the quantity you need

Size of Stickers: Approx. 3in x 2.25in

**DISCLAIMER**

• Please note that colors will vary compared to this image mockup due to screen monitor.
  
• Our stickers can be applied virtually anywhere when applied correctly
• Depending on the surface you'll be placing them in, you might have to cut or adjust the stickers.

We do not accept returns or exchanges for any of our products. We are not responsible for any stickers that are placed incorrectly. Make sure you are following application instructions.

Application Instructions for UV-DTF

• Make sure your glass cup is clean (or any other surface) you are applying the transfer to and DRY. (We recommend washing your cups/surfaces with dish soap and water)
• Before separating sticky adhesive from the design, scrape the design with a squeegee to ensure the entire design transfers to the clear film correctly.
• Peel the transfer off the sticky adhesive, starting with the corner
• Line to the transfer onto your glass cup or surface to your liking, PLEASE REMEMBER the adhesive is extremely strong. This means once the transfer sticks its almost impossible to take off.
• Once design is placed, use a squeegee over the entire design to push any air bubbles out.
• Heavily rub the entire design a few times to ensure everything is adhered correctly.
• Slowly peel the clear film off and you're done!